Description of bitumen 85/100
Bitumen penetration grade 85/100 is a standard penetration grade bitumen usually used as a paving grade bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacturing of hot mix asphalt for bases and wearing courses. Penetration grade bitumen supplied by Bitumen Malaysia is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by us is produced from the vacuum residue (short residue) feedstock. Penetration grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.
The Bitumen mode is dependent on temperature. The temperature-vs-stiffness relationship of bitumen is dependent on the type of crude oil and its refining method. Bitumen penetration grade 85/100 is semi-hard penetration grade bitumen used as a paving grade bitumen which is suitable for road construction and repair. It is also used for the production of asphalt pavements with the below technical specification. This grade of bitumen is mainly used in the manufacturing of hot mix asphalt for bases and wearing courses. Bitumen penetration grade 85/100 is one of the most used bitumen grades and it’s a basic material for all other bituminous products.
Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded the needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius.
Uses of bitumen 85/100
Bitumen 85/100 is suitable for road construction and for the asphalt pavements with superior properties. This type of bitumen used in the manufacture of hot mix asphalt for bases and wearing courses.
Properties of bitumen 85/100
Bitumen Malaysia’s bitumen 85/100 is fully qualified and guaranteed through the expertise of our international inspectors to ensure the quality meets the industry standards. Bitumen Malaysia’s bitumen is guaranteed to meet ASTM standard.
Technical specification of our bitumen 85/100
|Specific gravity @ 25°C
|Penetration @ 25°C
|Loss on heating
|Drop in penetration after heating
|Solubility in CS2